Why-Is-My-Blink-Camera-Flashing-Red

Why Is My Blink Camera Flashing Red? +1 805-791-2114 Blink Camera Customer Service Number

Tired of searching on the whole web for Why Is My Blink Camera Flashing Red? It is very much true that no person wants to deal with technical glitches often. Especially, when it comes to security cameras, we all have to be more concerned.

When it comes to safety, we should never compromise. Isn’t it? If you have found that your Blink Camera Flashing Red, you must check the internet connection first. A number of other reasons could also be responsible for the same which we are going to discuss in this guide below.

We are also available for 24*7 assistance. Dial the Blink Camera Customer Service Number now.

Note: A weak internet connection is one of the main reasons why your Blink Camera Blinking Red. Hence, your device will not record single footage until you will not connect it to the internet.

Why Is My Blink Camera Flashing Red?

It is sometimes very difficult to tell the main reason responsible for the Blink Camera Offline problem. We have researched and found that some main causes, let’s have a look:

  1. The sync module is not connected to the internet
  2. The wifi has stopped working
  3. The camera is not connected to the internet
  4. Distance between the sync module and router
  5. Damaged batteries

No matter what is the main cause for “Why Is My Blink Camera Flashing Red”, we are going to mention all the troubleshooting methods below.

Blink Camera Troubleshooting

In order to resolve the Blink Camera Red Light issue, make sure you are connected with a good speed internet connection. As we have told you already, a bad wifi connection is one of the main reasons why Blink Camera Not Working.

1. Make Sure Wi-fi Is Working

The wifi to which you have connected your Blink camera should be in working mode. It could be possible that your wifi goes down and hence Blink Camera Connected but Not Working. So, verify the issue and fix it as soon as possible.

2. Connect Sync Module With the Internet

You need to check properly whether your sync module has been connected to the internet or not. If not, restart the module or router, or else contact your internet service providers.

3. Restart the Sync Module

From old times, restarting is one of those effective troubleshooting methods that easily resolve technical issues. Hence, if you are getting irritated searching on the web for “Why Is My Blink Camera Flashing Red”, restart the sync module.

To do it, turn it off, plug out the cables and wait for some time. After a while, reconnect the cables and turn ON the module again. Let it connect to the internet and check for the red LED light.

4. Move Sync Module Close to the Router

Try to resolve the issue by minimizing the distance between the module and router. Sometimes, we used to move the module outside the range and end up facing the offline error in the Blink camera.

5. Restart the Wifi Device

It happens most of the time that wifi goes down for some reason. This could be one of the main reasons why your Blink Camera Live View Not Working. Hence, restart the router now by removing the power cables for a while. Reconnect them again after 30-40 seconds and turn ON the router.

6. Replace the Batteries

The batteries of the camera may not be placed accurately or get damaged completely. Hence, you need to remove them from the device and verify them properly. Replace them with the new ones if required.

Security Cam Helpline

Why Is the Blink Camera Not Working?

If you have recently noticed that your Blink security camera is not working, you should apply the steps mentioned below.

1. Verify All the Cable Connection

You may not have connected the cables properly, or else the power button is still off. Hence, you need to check all the cable connections and replace the ones that get damaged.

2. Power Recycle the Sync Module

The sync module is the medium that is used to connect the camera to the router. Hence, you need to check the sync module and if found any wrong, restart it.

To do it, turn it off, plug out the cables and wait for some time. After a while, reconnect the cables and turn ON the module again. Let it connect to the internet and check for the red LED light.

3. Reset the Security Camera

If you have applied all the steps but are still facing the error, reset your camera to factory defaults.

Security Cam Helpline
Conclusion

In the guide, we have given the answer for “Why Is My Blink Camera Flashing Red”. Apart from this, we have also mentioned all the steps that you should take to resolve the issues quickly. If you still need any guidance, dial the Blink Camera Customer Service Number now. Our experts are always there to assist their customers.

Tags in

, , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top

Call Now