Blink Home Security Cameras come with a variety of home security and guiding features. With the help of its live view feature, you can easily access the Blink camera easily with your mobile application. But, what will you do when your Blink Live View Failed.
Don’t worry, you don’t have to have to take stress as we are going to mention all the methods that will help you to fix the issue.
The Blink Camera Live View Failed error has been surrounded with a number of issues i.e from dead batteries to intermittent connectivity. But, you are lucky enough as you have got this guide.
In any case, if you are facing any issue then, dial the given Blink Camera Customer Service Number now. Our experts will fix the issue in a very short period of time.
A Quick Look When Blink Camera Live View Failed
We understand that it is sometimes very frustrating when Blink Live View Failed, especially when it is monitoring your home. Live view features in Blink security cameras provide the sound and video both. In addition to that, you can also connect the Blink security camera with Amazon Alexa. Now, you can control it with your voice commands.
Blink outdoor and indoor cameras can use the “Two Way Audio” on the life in order to communicate with the recipients that are being monitored with the security camera. In the Home monitor app, you have the option to access the additional live view features like video recording and gestures.
Note: If you will use the Live view feature in excessive amounts then, it can be harmful to the overall battery life.
Blink Camera Troubleshooting
If your Blink Camera Live View Failed then a variety of factors could be responsible for the same. It includes Blink Sync Module Offline because of the distance between the sync module and router or using the alkaline or rechargeable batteries.
We would like to tell you that you should only use the AA Lithium batteries in your Blink security camera as they have sufficient energy to charge your device successfully.
After research work, we have to find out the main cause of the blink outdoor camera not detecting motion. We are going to mention the troubleshooting methods one by one. Hence, start applying them until the security camera will not start recording properly.
Red Light On Blink Camera
The LED light on the Blink camera represents the status of your device. Each LED light has some meaning, for example, blue light on a security camera means that the camera is recording the events.
The same, Blink Sync Module Red Light means that your security camera has been disconnected from wifi. You can verify the signal strength of your connected devices. It is required to have at least 3 bars of signal in both the devices i.e Sync module and security camera.
To fix this issue, you can also reset the sync module or the security camera. Don’t worry, we will let you know how to reset it.
How To Reset Blink Camera?
In case of the Blink live view failed issue, it would be better if you will reset the camera and the Blink sync module. This will fix a number of security camera issues. In addition to this, if your device has intermittent connectivity-related issues then it would be better to restart the modem and the router.
In most of the security cameras, there is a reset button given to it so as to troubleshoot the issue. To factory reset the security cameras, here are the steps to follow:
- First, you would need to find the reset button given on your security camera. You can find the reset button given under the back cover. In case you are having the Blink mini, you will find the reset button below the lens.
- Now, you would need to press the reset button with the help of a thin object. Hold down the button now for at least 10 seconds.
- At this point, the indicator will turn off, and then you will see the Red Light On Blink Sync Module.
- Resetting the Blink security camera will fix the Blink Live View Failed issue.
Reset Blink Camera Sync Module
Before you reset the sync module, we would like to suggest you restart it first. For the same, unplug the sync module from the power outlet and then replug it after a while. Most of the time, it fixes the issues when your Blink camera will not connect to sync module.
In case, it still does not fix the issue then, complete the reset process with the help of the steps mentioned below.’
- On the module, press the reset button with the help of a thin object until you will not see a red light. You can easily find the reset button on the right-hand side near the USB port.
- Once you see the Blink Camera Flashing Red, you can then release the button. Now, the red light will be changed to solid green or flashing blue.
- Blink Camera Blinking Green and blue light mean that the sync module is ready to be paired with the internet connection.
The Live View feature in Blink security cameras is important for those who want to increase home security. You can also control the footage remotely. In any case, Blink Live View Failed then you can follow the guide given here. Restarting and resetting the device is one of the best ways to fix the glitch. Or else, you can also dial the given Blink Camera Customer Service Number anytime you want for immediate help.