Common Problems And Troubleshooting Methods Of Blink Home Security Cameras

Blink-Home-Security-Cameras

In the world of Security Cameras, Blink Home Security Cameras come on the top and it’s all because of their great feature and it’s very easy to use. Isn’t it? 

If you are also an old Blink camera user then you must not deny the fact. Yes, we understand that sometimes, these devices start to show one or another kind of issues. 

In this guide, we are going to discuss different problems for security cameras along with their troubleshooting methods. 

From now, you don’t need to search here and there when your Blink stopped working. 

Easy Solution For Blink Home Security Cameras Problems

It happens most of the time that you find that your home security camera stopped recording. In this case, here are the methods needed to fix Blink Camera Connected but Not Working

Some of the common Blink camera-related issues are as follows: 

  1. Blink Camera Not Recording 
  2. Blink Camera Not Detecting Motion 
  3. The Blink Camera Not Working Red Light
  4. Blink Camera Not Working
  5. Blink Camera Video Stopped Unexpectedly

How To Fix When Blink Camera Not Recording?

If you have found that your Blink Home Security Cameras are not recording then here are the easy steps to fix it. 

1. Check Your Wifi Router Properly

If your Blink Camera Not Recording anything then you must check whether your router is working properly or not.

Until and unless you will not connect the camera to the internet, it will not record anything. 

2. Move The Blink Camera Near The Router

Several times, it used to happen that a user used to place the security camera outside the network connectivity range.

If you have made the same mistake then move your security camera near the router. 

3. Reinsert The Batteries In Your Blink Camera

If you have changed the position of your Blink Home security cameras and it is still not recording then reinsert the batteries again.

Also, don’t forget to check whether the batteries that you have inserted into the camera are in working condition or need to be replaced. 

4. Restart The Blink Camera

Even after trying all the steps if your Blink camera still is not recording then give your device a quick restart. 

To restart the Blink camera, turn it off and then remove the power plug from the wall outlet. Now, remove the batteries from the camera and then wait for at least 20-30 seconds. 

Reinsert the batteries again and then reconnect all the cables back to their place. 

How To Fix When Blink Camera Not Detecting Motion?

If your Blink Home Security Cameras are not detecting any motion, here are the troubleshooting steps to fix the problem. 

1. Verify All The Cable Connection 

One major issue why your Blink Camera Not Detecting Motion could be related to the faulty power connection. 

You need to check whether you have plugged the power plug into the power source properly or not.

2. Check The Blink Motion Detection Settings

Another main reason why your Blink Camera Not Recording could be related to the wrong detection settings. 

Here are the steps to check the detection setting of the Blink camera, 

  • Open the Blink Home Monitor app on your device first. 
  • Open the Camera Settings. 
  • Make sure the toggle button for Motion Detection is turned ON. 
  • After enabling motion detection, don’t forget to arm your systems. 
  • Wait for a while and your Blink camera will start the recording again. 

3. Check The Sensitivity Settings Of Blink Camera

Most of the time, it’s not the device’s fault but sometimes, a user accidentally used to save the sensitivity settings to low. This is the main reason why Blink Home Security Cameras do not detect motion sometimes.

  • On your smartphone, open the Blink camera app and tap on the “Camera Settings”. 
  • Go to the section of “Motion Detection” and then adjust the slide according to your convenience. 
  • After doing that, don’t forget to save the settings. 

4. Reinsert The Batteries In Your Blink Camera

If you have tried each and everything but still your Blink Home security camera is not working, reinsert the batteries again. 

Also, don’t forget to check whether the batteries that you have inserted into the camera are in working condition or need to be replaced. 

How To Fix When Blink Home Security Cameras Not Working?

We know that your Blink Camera Not Working, here are the steps that you can try to fix the problem. 

1. Verify All The Cable Connection 

One major issue why your Blink Camera Not Detecting Motion could be related to the faulty power connection. 

You need to check whether you have plugged the power plug into the power source properly or not. 

2. Check The Wifi 

It may be possible that there is nothing wrong with your Blink camera but the thing is, your router has stopped working. 

Hence, connect any other device with the same wifi to check whether it is working properly or not. 

3. Move Your Camera Close To The Router

Several times, it used to happen that a user used to place the security camera outside the network connectivity range. 

If you have made the same mistake then move your security camera near the router. 

Security Cam Helpline

Conclusion

While using Blink Home Security Cameras you may encounter a number of issues. In this guide, we have discussed all the troubleshooting methods that are enough to deal with the Blink camera problem. 

In case you are still facing any kind of issue then do call us now on the given helpline numbers. We have a team of experts who is round the clock available to help you. Dial the helpline number anytime and our experts will be there to help you.

Common Problems And Troubleshooting Methods Of Blink Home Security Cameras

Tags in

, , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top

Call Now

Call Now +1 800-983-7116